Table of Contents
Advertisement
Chapter 4. Defining Packet Endpoints
P
C
ACKET
NCTS
F
: PEP
ROM
S
UBLINK
T
: PEP
O
S
UBLINK
4-22
After packet endpoints are defined, they are connected in the packet con-
nects (P
C
) map (see the menu tree in Figure 4-15). P
ACKET
NCTS
connects upper layer protocols from packet endpoint to packet endpoint.
You can think of it as a dedicated map for virtual ports rather than physical
ports.
Packet Manager Packet Cncts
Write Security: 3; Read Security: 5
Selects one packet endpoint for the packet connection. Packet endpoints
created in the packet endpoint configuration are visible on a pull-down
menu which includes the option, R
available in this pull-down menu. The router is the internal ATLAS router
and can be used multiple times within the P
Write Security: 3; Read Security: 5
If the packet endpoint selected in F
available in this menu. In frame relay, this is the PVC from which you are
selecting to groom data.
Write Security: 3; Read Security: 5
Selects the other packet endpoint for the packet connection. Refer to F
PEP for more detail.
Write Security: 3; Read Security: 5
If the T
: PEP packet endpoint supports sublinks, the available sublinks are
O
shown within this menu, which includes the R
ATLAS Frame Relay User Manual
Packet Endpnts
From: PEP
Sublink
Cncts Sort
To: PEP
Frame Relay IQ
Sublink
Protocol
Config
Figure 4-15. Packet Connects Menu
. Additionally, a router option is
OUTER
C
ACKET
NCTS
: PEP supports sublinks, they are
ROM
option.
OUTER
C
ACKET
NCTS
Conflict
From
To
menu.
:
ROM
61200263L1-1.1
Advertisement
Table of Contents
