Commissioning; General Safety Instructions - Siemens SIPROCESS GA700 Compact Operating Instructions

Commissioning

6.1

General safety instructions

Introduction of toxic and harmful gases into the device
Danger of poisoning
Various gases with compositions known only to the operator can occur in introduced gas
mixtures. The introduction of toxic gas mixtures can result in poisoning.
• Only introduce gas mixtures into the device whose composition is known to you and that
• In the case of toxic, aggressive and/or combustible gases, ensure that the components are
Commissioning and operation with error message
If an error message is displayed, correct operation in the process is no longer guaranteed.
• Check to see which error is pending.
• Correct the error.
• If the error continues to exist:
Leaking of toxic gases when the device is vented
Danger of poisoning
Toxic sample gases and liquids can be released when the device is vented.
• Before venting, ensure that there are no toxic gases or liquids in the device.
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11
WARNING
are suitable for analysis in the respective device. Observe the safety information in these
operating instructions. If in doubt, contact your local SIEMENS partner.
suitable for use.
WARNING
– Take the device out of operation.
– Prevent a new commissioning.
WARNING
6
61