Introduction
1.1
Purpose of this document
These compact operating instructions are a brief summary of important features, functions and
safety instructions, and contains all information required for safe use of the device. These are
instructions on mounting, connecting, commissioning, operation, servicing, dismantling and
decommissioning of the device.
The compact operating instructions are intended for qualified personnel who have been
instructed in all the work on the device in hazardous areas and possible dangers resulting from
improper behavior and have been taught.
It is your responsibility to read the compact operating instructions thoroughly and understand
them before beginning any work. To guarantee correct handling, you should become
acquainted with the principle of operation of the gas chromatograph.
The compact operating instructions belong to the device. Keep them in the direct vicinity of the
device.
To achieve optimum usage of the device also read the detailed version of the operating
instructions, see "References (Page 107)".
1.2
History
The following table includes information on the different editions of this document.
Edition
10/2014
05/2015
05/2018
11/2019
01/2022
1.3
Purpose
The device is designed for the concentration analysis of gases in gas mixtures. Depending on the
installed analyzer module, different gases can be examined.
Use the device only for measuring/analysis of gas concentrations in gas mixtures according to
the information in section "Technical specifications (Page 83)".
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11
Remark
First edition
Expansion commissioning. Correction of the internal document links
Expansion with new Ex analyzer modules:
•
ULTRAMAT 7 and CALOMAT 7
•
OXYMAT 7 and ULTRAMAT 7 in high-temperature version
Expansion and updating of the document
OXYMAT 7 and ULTRAMAT 7 in high-temperature version
Updating the document
General update of the document
1
7