Recommended Test Setup For The Oxymat 7, High-Temperature Version - Siemens SIPROCESS GA700 Compact Operating Instructions

Test setup for leakage test of analyzer modules in standard version
To check for leaks, we recommend the test setup shown below:
①
②
③
1
2
3
4
Figure 6-2
6.5.3

Recommended test setup for the OXYMAT 7, high-temperature version

Arrangement of gas connections in the OXYMAT 7 high-temperature in the wall-mounted device
The following figure shows the gas connections of a high-temperature OXYMAT 7:
1
2
4
Figure 6-3
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11
Shut-off valve
Pressure regulator
Manometer (gauge pressure)
Sample gas inlet
Sample gas outlet
OXYMAT 7 / ULTRAMAT 7: Unscrewing blanking plugs
OXYMAT 7 / ULTRAMAT 7: Unscrewing blanking plugs
Recommended test setup to check for leaks
Sample gas inlet
Sample gas outlet
Reference gas inlet
Arrangement of gas connections in OXYMAT 7 high-temperature
Commissioning
6.5 Checking gas paths for leaks
67