Connecting The Ethernet Cable - Siemens SIPROCESS GA700 Compact Operating Instructions

Connecting
5.2 Electrical connections
7. Fasten the signal cable in the cable gland
of 3 Nm.
8. Insert the shielding plate
9. Close the door of the wall-mounted device and tighten the six screws
of 2 Nm.
See also
References (Page 107)
5.2.6.3

Connecting the Ethernet cable

Establishing a shield for the Ethernet cable
Note
Metalized cable gland
The metalized cable gland required for shielding is included in the scope of delivery.
56
③
. To do this, tighten the union nut with a torque
②
in the wall-mounted device again and fasten it with screws.
Compact Operating Instructions, 01/2022, A5E35134047-11
①
again with a torque
Devices in explosion-proof design