Copying Configuration From Disk To Instrument Store - Agilent Technologies OmniBER 718 SDH User Manual

Using Instrument and Disk Storage

Copying Configuration from Disk to Instrument Store

Copying Configuration from Disk to Instrument
Store
Description If you have a configuration stored in the instrument store that you wish to use on
another instrument, you can copy it to Disk. The configuration can then be
downloaded from the disk in another OmniBER 718 with the same options as the
original instrument.
1 Choose the directory containing the configuration file. See "Accessing
HOW TO:
Directories and Files " page 284.
2 Choose DISK OPERATION
Instrument Store number using
press
Enter a description of the configuration using
The description can contain up to 24 alphanumeric characters.
3 Enter the filename the configuration is to be copied from using
be copied on the file manager display and press
The file name can contain up to 8 alphanumeric characters.
The filename extension is fixed as .CNF.
300
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
and use the pop-up keypad.
SET
or press
NEXT CHAR
PREVIOUS CHAR NEXT CHAR
FILE COPY CONFIGURATION
and
DECREASE DIGIT INCREASE DIGIT
PREVIOUS CHAR
and use the pop-up keypad.
SET
or press SET
SET .
and enter the
or
,
highlight the file to