To Save An Instrument Basic Program To Disk - Agilent Technologies 35670A Quick Start Manual

Automating Measurements

To save an Instrument BASIC program to disk

1
Select the active Instrument BASIC program.
2
Select the default disk.
3
Press [
Press [
4
Type a file name, then press [
5
If the program had been saved before, press [
After you have entered a file name the analyzer saves the active program to a file on
the default disk. If the file name ends with a number (for example, PROG1), the
analyzer automatically increments the default file name during successive save
operations. For more information on typing a file name and selecting the default disk,
see "To type a text string" and "To select the default disk" earlier in this book.
To save a program, press [SAVE PROGRAM]
Determines if program is saved as an ASCII
file or binary file
60
] [
Save/Recall
SAVE MORE
].
SAVE PROGRAM
ENTER
Agilent 35670A Quick Start Guide
].
].
OVERWRITE FILE
If program already exists,
press [OVERWRITE FILE]
].