Disk Drive Operations
How to Store Files on a Disk
How to Store Files on a Disk
The Store operation allows you to store instrument configurations and
measurement data. Use this operation when you want to save the present
analyzer setup to recall at a later time.
When configurations are stored to the disk, you are given the option to store
System only, Analyzer only, or All (System and Analyzer).
To store a file, perform the following steps:
Insert the destination disk into the disk drive.
1
Select the Store disk operation.
2
When the Store selection is made, the instrument reads the disk directory
and displays a list of all files on the disk. If there are no files, NO FILES is
displayed.
Press the
keys to move the cursor to the file type field, then
3
arrow
press the
Select
key.
File Type Parameter Field
6–12
File type field