Power Off - Royal RHBH-153 Directions For Use Manual

9.3 IGNITION
Before each ignition, make sure that the burn pot is completely empty and correctly positioned in its seat.
To turn on the stove hold the key
Avoid manually turning on the stove if the automatic ignition system is compromised.
!
During initial ignition of the stove it is possible to generate unpleasant smells or fumes caused by the evaporation or
drying of some of the materials used. This phenomenon will gradually disappear.
During the first lightings, we recommend that you keep the premises well ventilated.
Do not pour pellets directly into the burn pot.
Stoves in the "Hermetic" series:
Each time the fire box door and pellet tank door is opened, avoid leaving it open for long periods to prevent the closure sen-
sor from notifying the open door status with an acoustic alarm.

9.4 POWER OFF

To turn off the stove hold the
F
It is advisable to wait for the stove to completely cool before re-igniting it again.
The stove should always be turned off strictly in accordance with the above, and absolutely not by disconnecting it from
the mains power.
9.5 OPERATION WITH AMBIENT PROBE ON STOVE
The stove can be switched on/off manually or in a programmed way.
The stove modulates the power depending on the ambient temperature measured by the onboard probe (that is, the stove
tries to maintain the desired temperature, consuming as little as possible).
If the user has enabled the "Standby" function, rather than modulate, the stove will turn off when the set temperature is
reached, then re-ignite when the ambient temperature falls below the set delta.
The desired ambient temperature can be set using the keys
48
pressed for a few seconds.
key pressed for a few seconds.
.