Control Panel; Date And Time - Royal RHBH-153 Directions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

7.

CONTROL PANEL

A - SET User Menu
B - AUTO to enable the weekly programmer
C - ON/OFF and exit from Menu functions
D - Temperature setting + and menu functions
E - Temperature setting – and menu functions
F - Heating programme setting+ and menu functions
G - Heating programme setting – and menu functions
H - Remote control infra-red sensor
I - Alphanumeric 16x2 LCD Display
7.1 USE OF PANEL
Press
SET (A) to open the user menu. Scroll the menu using the keys
To open the submenu, confirm using the
1 - Set Date and Time
2 - Weekly programmer setting
3 - Thermostat mode
4 - Stove parameters
5 - Error log
6 - Language selection
7 - Fuel selection
7.2 PROGRAMMING
User programming is possible through the menu, which can be opened by pressing the SET key on the illuminated display
panel. To exit the menu at any time without making any changes, press the STOP key. In any case, if the keys are not pressed
for about 1 minute, the system will automatically exit the menu to show the stove status. To scroll the various menus use the
TEMP+ and TEMP keys, to open the displayed menu, press SET.

7.3 DATE AND TIME

Press SET to open the incorporated calender setting menu. The day of the week can be changed from Monday to Sunday, as
well as the time and date. To switch between the variables, use the PROG+ and PROG- keys, and to change the values, use the
TEMP+ and TEMP- keys. To confirm the changes and exit, press the SET key.
7.4 WEEKLY
The programmer is only active in the automatic operating mode (AUTO on the display).
There are 15 settable programming levels for on and off times, the temperature and operating programme. Each single pro-
gramme can be disabled without needing to be cancelled, following a very simple procedure.
Press SET to open and scroll the various programmes, or the TEMP+ and TEMP- keys to scroll the variables to be changed.
Then use the PROG+ and PROG- keys to set the requested values.
7.5 PROGRAMME NUMBER
Indicates the selected programme, from 1 to 15.
44
Fig. 16
SET (A) key.
Fig. 17
Fig. 19
and
.
Fig. 18a+18b

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents