Preparing The Mounting Cut-Out - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Installing/Mounting

5.3 Preparing the mounting cut-out

5.3 Preparing the mounting cut-out
The following illustration shows the dimensions for the mounting cut-out.
(1)
(2)
(3)
Figure 5-1
Note
Mounting dimensions can be read from the dimension overview or they can be transferred to
the cabinet from the mounting template supplied.
38
Drill hole for screw attachment
Pressure points for clamp
Setscrews
Drill holes for the screws and pressure points for the clamp screws
(4) Clamp
(5) R 120 in the seal area
Z
(6) Seal area
Operating Instructions, 10/2010, A5E02368074-02
SIMATIC HMI IPC577C