Certificates And Approvals - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Appendix
A.2 Certificates and Approvals
A.2

Certificates and Approvals

DIN ISO 9001 certificate
The Siemens quality management system for all production processes (development,
production and sales) meets DIN EN ISO 9001:2000 requirements.
This has been certified by DQS (the German society for the certification of quality
management systems).
EQ Net Certificate No.: DE-001108 QM
Software license agreement
The device can be supplied with or without preinstalled software. For devices with
preinstalled software, please note the relevant license agreements.
Approvals for USA and Canada
Product safety
The following approval is available for the device:
EMC
USA
Federal Communications
Commission
Radio Frequency
Interference Statement
Shielded cables
Modifications
Conditions of operations
182
Underwriters Laboratories (UL) according to standard UL508 and C22.2 No. 142 or
C 22.2 No. 14-05 (IND.CONT.EQ)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02