Table of Contents
Advertisement
Upon
first
warm-up
completed, the machine
primes
the
performs a rinse cycle of
the internal circuits. During
this
process,
amount
dispensed. Wait for this
cycle to be completed.
7.11
First Use - Use after a Long
Period of Inactivity
Refill the machine (follow the instructions above).
Connect the plug of the appliance to the mains (see
section "Connection to the Electric Network").
For a perfect Espresso: rinse the coffee circuit if using
the machine for the first time or after a long period of
inactivity.
These simple operations will allow you to always brew
excellent coffee.
They have to be performed:
• at first start-up;
• when the machine remains inactive for a long time
(more than 2 weeks).
use,
once
has
been
circuit
and
a
small
of
water
If the machine fails its first
start-up (brewing) make 2
further attempts. At the
end of these 3 attempts, if
the problem is not solved,
let the machine rest for 30
minutes and then try again
is
with 3 brewings. If the
problem persists, please
contact Customer Service.
7.11.1 After a Period of Inactivity
Empty the water tank, wash and rinse it and fill it with
fresh water (see section "Filling the Water Tank").
Place a large container under the coffee dispensing
spout.
Press the "Coffee" button to start brewing. The machine
starts brewing coffee from the dispensing spout. Wait
until brewing has been completed and empty the
container. Repeat the brewing process 3 times.
English
31
Hide quick links:
Advertisement
Table of Contents
