Table of Contents
Advertisement
Before lubricating the brew group, clean it under
running water as described in the "Brew Group
Cleaning" chapter.
Lubricate the brew group guides using Saeco grease only.
Apply the grease evenly on both side guides.
Lubricate the shaft too.
Insert the brew group into its seat again until it locks
into place WITHOUT pressing the "PRESS" button.
Close the service door. Insert the coffee grounds
drawer and the drip tray.
10.2.9 DESCALING
Limescale is a natural part of the water used for
machine operation. It needs to be removed regularly
as it may clog the water and coffee circuit of your
appliance. The machine indicates on the display when
descaling is required.
Just follow the steps described below. This operation
needs to be carried out before the appliance stops
working properly, as in this case repair is not covered
by warranty. The descaling and maintenance products
can be purchased from your local dealer or the
authorised support centres.
Do
not
decalcifying solution.
Never use vinegar as a
descaling solution.
Remove the anti-scale filter
before
descaling solution.
Turn on the machine by pressing the ON/OFF button.
The following screen is displayed when rinsing and
warm-up are complete:
START
DESCALING?
yes
Select "YES" and press the "OK" button. The following
screen is displayed:
English
drink
the
adding
the
no
69
Hide quick links:
Advertisement
Table of Contents
