Saeco Royal OTC Operation And Maintenance Manual page 68

English
Press the "OK" button to confirm the removal of the
brew group.
INSERT TABLET
Brew Group Clean
OK
If this option is confirmed,
the cycle
completed. Select "EXIT"
to exit.
Place the cleaning tablet in the brew group and refit the
group in the machine, making sure that all the components
have been inserted and that the door is closed.
After placing the tablet in the brew group, press the
"OK" button to confirm.
PUT BACK THE
GROUP
IN THE MACHINE
OK
Put the brew group back into the machine and press
the "OK" button to confirm.
PLACE A CONTAINER
UNDER THE SPOUT
Coffee
OK
Place a container under the coffee dispensing spout and
press the "OK" button to confirm.
68
Exit
The machine completes the cycle automatically.
must be
10.2.8 Brew group lubrication
Lubricate the brew group after approximately 500 cups
of coffee or once a month. The grease for lubricating
the coffee unit and the relative accessories can be
purchased from your local dealer or the authorised
support centres.
Exit
Brew Group Clean
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back to
operating mode.
It is recommended
remove the group and wash
it under fresh running water.
Ensure that the brew group
is completely dry before
putting it back into the
machine.
To see how many coffees
have been dispensed, see
the "PRODUCTS" menu
in the "STATISTICS" menu
of the tech. menu (see
section "Description
messages
programming menu").
its normal
to
of
in the