Saeco Royal OTC Operation And Maintenance Manual page 70

English
REMOVE
WATER FILTER
OK
This screen will be visible
only if the water filter has
been activated.
Remove the tank from the machine and empty it.
Remove the anti-scale filter. Select "OK" and press the
"OK" button. The following screen is displayed:
POUR
DESCALER INTO
THE WATER TANK
OK
Pour 250 ml of descaling product into the water tank.
Select "OK" and press the "OK" button. The following
screen is displayed:
ADD WATER
UP TO LEVEL
CALC CLEAN
OK
Put back the water tank. Add water into the water
tank up to the "CALC CLEAN" level. Select "OK" and
press the "OK" button. The following screen is
displayed:
EMPTY
THE DRIP
TRAY
OK
Remove and empty the drip tray.
70
After emptying it, put the drip tray back into place.
Select "OK" and press the "OK" button. The following
screen is displayed:
Exit
OK
Check that the Cappuccinatore is correctly positioned.
Select "OK" and press the "OK" button. The following
screen is displayed:
PLACE A CONTAINER
OK
Exit
Place a large container under the dispensing spouts
(hot water and coffee).
Exit
Select "OK" and press the "OK" button. The following
screen is displayed:
Exit
The first descaling phase starts. Press the "OK" button
to pause the cycle. Press the "OK" button again to
resume the cycle. When the solution in the tank is
finished, the machine requests to empty and rinse the
tank with fresh drinking water.
WITH FRESH WATER
INSERT THE
Cappuccinatore
ALL THE COMPONENTS
UNDER ALL
THE SPOUTS
STEP 1/2
DESCALING
RINSE TANK
& FILL IT
OK
Exit
Exit