Adjusting The Beverage Dispenser; Turning On/Off The Machine; Setting The Language (Upon First Use); First Use - Use After A Long Period Of Inactivity - Saeco MAGIC M2 Technical Manual

English
7.10

Adjusting the beverage dispenser

Most of the cups and mugs available on the market can be used with this coffee
machine. The height of the dispensing spout can be adjusted to better fit the
dimensions of the cups that you wish to use.
Manually move the dispensing spout up or down to adjust its height.
The recommended positions are:
• When using small cups.
• When using mugs.
• To use tall glasses.
34
Two cups can be placed under the dispensing spout to brew two cups of coffee at
the same time.
7.11

Turning on/off the machine

The machine can be turned on/off by pressing the button located to the rear of the
machine.
7.12

Setting the Language (Upon First Use)

At first start-up, the desired display language of the messages must be selected and
stored.
Tap on the flag icon and select the desired language flag. Press the "Next" button to
store the language. The machine starts the system warm-up.
Upon first use, once warm-up has been
completed, the machine primes the circuit
and performs a rinse cycle of the internal
circuits. During this process, a small
amount of water is dispensed. Wait for
this cycle to be completed.
7.13

First Use - Use after a Long Period of Inactivity

Refill the machine (follow the instructions above).
Connect the plug of the appliance to the mains (see section "Connection to the
Electric Network").
For a perfect Espresso: rinse the coffee circuit if using the machine for the first time
or after a long period of inactivity.
These simple operations will allow you to always brew excellent coffee.