Table of Contents
Advertisement
6. "ENGLISH" or "METRIC" will appear. If you do not want to change the unit of
measure, press the "ENTER" key to view other settings. If you do want to change the
unit of measure, press the "UP" or "DOWN" key until your preference appears. Then
press the "ENTER" key to view other settings.
7. Total time in use will appear, for example, "000257H 02.38," indicating 257 hours, 2
minutes, and 38 seconds of use. Press the "ENTER" key to view other settings.
8. Total distance of use will appear, for example, "DIST 00016847 ML," indicating 16847
miles of use. Press the "ENTER" key to view other settings.
9. "PWM OUTPUT 0" will appear. Do not press the "UP" or "DOWN" key to change the
setting. Press the "ENTER" key to view other settings.
10. "OFF BATTERY" will appear. Press the "ENTER" key to exit engineering mode and
enter normal operation mode.
11. If the console is still in engineering mode, remove the batteries from the back of the
console. Console lights will extinguish. Wait one minute. Put batteries back into place.
Resume normal use.
To Change Language Settings:
1. When the console is not lit, start exercising on the product. As soon as the unit powers
up, simultaneously press and hold "QUICK START" and "CLEAR" keys for three
seconds.
2. Simultaneously press and hold the "QUICK START" and "UP" keys.
3. Press the "UP" or "DOWN" key to view various language options. When your preferred
language appears, press and hold the "ENTER" key to select that language.
4. "SAVE OK" will appear. Press the "ENTER" key.
5. To resume normal use, stop exercising on the product, and let the console lights
extinguish. Then start exercising again. Normal operation should resume.
6. If the console is still in language selection mode, remove the batteries from the back
of the display console. Console lights will extinguish. Put batteries back into place.
Resume normal use.
CONSOLE OPERATION
6
PAGE 21
Advertisement
Table of Contents
