Table of Contents
Advertisement
Immediately upon arrival, purchaser shall check the packing container against the enclosed
packing list and shall, within thirty (30) days of arrival, give Fluke notice of shortages or any
nonconformity with the terms of the order. If purchaser fails to five notice, the delivery shall be
deemed to conform with the terms of the order.
The purchaser assumes all risk of loss or damage to instruments upon delivery by Fluke to the
carrier. If an instrument is damaged in transit, PURCHASER MUST FILE ALL CLAIMS FOR
DAMAGE WITH THE CARRIER to obtain compensation. Upon request by purchaser, Fluke will
submit an estimate of the cost to repair shipment damage.
Fluke will be happy to answer all questions to enhance the use of this instrument. Please address
your requests or correspondence to: Fluke Corporation, P.O. Box 9090, Everett, WA 98206-9090.
Declaration of the Manufacturer or Importer
We hereby certify that the Fluke Models 5320A is in compliance with Postal Regulation Vfg. 1046
and is RFI suppressed. The marketing and sale of the equipment was reported to the German
Postal Service. The right to retest this equipment to verify compliance with the regulation was
given to the German Postal Service.
This equipment generates and uses radio frequency energy and if not installed and used in strict
accordance with the manufacturer's instructions, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for a Class B computing
device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one
of more of the following measures:
•
Reorient the receiving antenna
•
Relocate the equipment with respect to the receiver
•
Move the equipment away from the receiver
•
Plug the equipment into a different outlet so that the computer and receiver are on different
branch circuits
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet prepared by the Federal
Communications Commission helpful: How to Identify and Resolve Radio-TV Interference
Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C.
20402. Stock No. 004-000-00345-4.
Claims
Interference Information
Advertisement
Table of Contents
