Table of Contents
Advertisement
Beyond the basics
2
Press
or /
until the reduction setting you want appears. In this
PROGRAM
example, we've chosen 75%.
Copy Reduc Rate: 75%
Program/Enter
3
Press
to save the setting. The
ENTER
Copy Reduc Rate: 75%
Margin(00-85mm):
4
Use the numeric keypad to enter the reduction margin you want. If necessary,
press
or /
to move the cursor. Here, we've chosen 00mm.
PROGRAM
Copy Reduc Rate: 75%
Margin(00-85mm):
5
Press
to save the setting.
ENTER
Setting the number of rings
You can set how many times your fax machine will ring before answering a call.
Choose from 1 to 9 rings.
1
Press /
,
, 0, 6,
PROGRAM
J
Set # Of Rings
#
(1-9):
2
Use the numeric keypad to enter the number of rings you want, from 1 to 9.
Here, we've chosen 4 rings.
Set # Of Rings
#
(1-9):
Note: If you enter 0 (zero), the machine will beep briefly to warn you that it
can't accept that setting.
3
Press
to save the setting.
ENTER
2.4
shows the current reduction margin:
LCD
24
00
. The
shows:
ENTER
LCD
2
4
Setting
ECM
"Line noise," or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That's why your fax machine gives you the option of using Error Correction Mode
(
). When two fax machines communicate while running in
ECM
machine automatically checks the data as it sends. If the receiving fax machine can't
verify the transmission, the first machine will re-send it as necessary.
Note:
gives you a better chance of transmitting a fax document over a bad
ECM
phone line, but it could also slow down the transmission time. And the worse
the line is, the slower the transmission. That's why the machine lets you
turn
on or off as needed.
ECM
Note: Not all fax machines have
ECM
a fax machine not currently using
transmission from a usual, non-
1
Press /
,
, 0, 8,
PROGRAM
J
ENTER
ECM Mode:
On
Program/Enter
2
Press
or /
until the mode you want appears.
PROGRAM
In this example, we've chosen Off.
ECM Mode:
Off
Program/Enter
3
Press
to save the setting.
ENTER
, the sending
ECM
. If you've activated
and then transmit to
ECM
, there will be no change in the fax
ECM
transmission.
ECM
. The
shows the current
setting:
LCD
ECM
Advertisement
Table of Contents
