Example 2 - Set Up Two Routefinders Behind A Nat Device; Step 1 -- Network Setup - Multitech RouteFinder RF825-C-Nx Reference Manual

Example 2 – Set Up Two RouteFinders Behind
a NAT Device
Side A
Note: Prerequisite Steps must be completed before you start this setup.

Step 1 -- Network Setup

1. Log into your RouteFinder and go to the Networks & Services screen.
2. Create and enter in the Name, IP Address, and Subnet Mask of the Remote WAN.
3. Click the Add button to add the new network to the list
4. Create and enter in the Name, IP Address, and Subnet Mask of the Remote LAN.
5. Click the Add to add the new network to the list
Once the network configuration is complete, the information about that network displays at the bottom of
the screen.
Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B)
Remote-WAN 65.126.90.248
Remote-LAN 192.168.25.0
Chapter 2 – Behind NAT Setup Examples
Side B
255.255.255.255 Edit
255.255.255.0 Edit
| Delete
| Delete
25