Mounting The Device; Activating The Account For Wireless Devices; Installing The Sim Card - Multitech MultiConnect rCell 100 MTR-H5 User Manual

Table of Contents

Advertisement

Mounting the Device

1.
Locate the groove on the bottom of the modem.
2.
Slide the mounting rod through the groove.
3.
To secure the rod to the desired surface, place and tighten two screws in the holes on either end of the
mounting rod. The dimensions illustration in this guide shows the mounting rod, as well as the
dimensions for placement of the screws.

Activating the Account for Wireless Devices

For information on activating your cellular modem:
1.
Go to http://www.multitech.com/support.
2.
Select your device.
3.
Scroll to Activation and click Download.
Note:
If you need remote access to your MultiConnect device over the Internet for remote configuration,
ensure that your wireless network provider has provisioned mobile terminated data and fixed or dynamic
public IP address in which they can configure the network to redirect any incoming connection to that
predefined IP.

Installing the SIM Card

If you want to operate the router on a GSM/HSPA network, install a SIM card (Subscriber Identity Module).
To install the SIM:
1.
Locate the SIM card slot on the side of the router. The slot is labeled SIM.
®
MultiConnect
rCell 100 MTR-H5 User Guide
INSTALLING AND USING THE ROUTER
21

Advertisement

Table of Contents
loading

Table of Contents