Communications; Establishing Communications Sinamics G110 Starter - Siemens SINAMICS G110 Operating Instructions Manual

Issue 11/04
4

Communications

4.1 Establishing communications SINAMICS G110
STARTER
The following optional components are additionally required in order to establish
communications between STARTER and SINAMICS G110:
PC <-> frequency inverter connecting kit (order no 6SL3255-0AA00-2AA0)
BOP, as far as the USS standard settings already kept in the Sinamics G110
shall be changed (order no 6SL3255-0AA00-4BA0)
PC <-> SINAMICS G110 connecting Kit
SINAMICS G110
Operating Instructions (Compact)
SINAMICS G110
USS settings, refer to Section 6.2.1, Page 17.
STARTER
Menu, Options --> Set PG/PC interface -->
Select "PC COM-Port (USS)" --> Properties
--> Interface "COM1", select a baud rate
NOTE
The USS parameter settings in the SINAMICS
G110 frequency inverter and the settings in
STARTER must match!
4 Communications
11