MT1932ZDX Quick Reference Guide
Compliance with DTI 83/009
a.
The apparatus is only approved for compatible PBXs. Consult the
supplier for an up-to-date list of compatible PBXs.
b.
There is no guarantee of correct working in all circumstances. Any
difficulties should be referred to Multi-Tech Systems.
c.
If sockets are required for connection to the PBX, use the BT post card
only if BT owns the wiring to the PBX.
This apparatus has been approved for the use of the following facilities:
•
Auto-calling
•
Loop disconnect and MF dialing
•
Phone number storage and retrieval by a predetermined code
•
Operation in the absence of proceed indication
•
Detection of initial and secondary proceed indication
•
Automatic storage of last number dialed
•
Tone detection-busy
•
Auto clear from the originating end
•
DTR dialing
•
Modem
•
PBX timed break register recall
Any other usage will invalidate the approval of the apparatus if, as a result,
it then ceases to comply with the standards against which approval was
granted.
70