Multitech MT1932ZDX Quick Reference Manual page 39

Chapter 4 - AT Commands, S-Registers and Result Codes
Command: O
Values:
Description:
Command: P
Values:
Default:
Description:
Command: &P n
Values:
Default:
Description: &P0
&P1
Note: The ZDXK is locked to a 67:33 pulse ratio (&P1).
Command: Q n
Values:
Default:
Description: Q0
Q1
Q2
Command: &Q n
Values:
Default:
Description: &Q0
&Q1
Go Back On Line
n/a
Return to online mode after you have used an
escape sequence to go from online mode to
command mode.
Pulse Dial
n/a
Yes
The modem pulse-dials numbers that follow P in
the dialing command.
Set Pulse Dial Ratios
n = 0 or 1
0
60:40 break/make pulse ratio.
67:33 break/make pulse ratio.
Result Codes Enable/Disable
n = 0, 1, or 2
0
Enable result codes.
Disable result codes (quiet).
Enable no-response answer mode, which leaves
originate mode intelligent while turning off
answer mode responses and echo.
Multi-Tech or Standard Result Codes
n = 0 or 1
0
Multi-Tech responses with modifiers.
Standard AT responses with no modifiers.
39