Multitech MT1932ZDX Quick Reference Manual page 33

Chapter 4 - AT Commands, S-Registers and Result Codes
Command: >DT n DTMF Detection
Values:
Default:
Description: >DT0 The modem will not detect DTMF tones.
>DT1 The modem will detect and report DTMF tones
E n
Command:
Values:
Default:
Description: E0
E1
Command: &E n
Values:
Default:
Description: &E0
&E1
&E2
&E n
Command:
Values:
Defaults:
Description: &E3
&E4
&E5
&E n
Command:
Values:
Defaults:
Description: &E6
&E7
n = 0 or 1
0
when it is off-hook.
Echo Command Mode Characters
n = 0 or 1
1
Do not echo keyboard input to the terminal.
Do echo keyboard input to the terminal.
V.42 Error Correction Modes
n = 0, 1, or 2
1
V.42 non-error correction mode (V.42 disabled).
V.42 auto-reliable mode.
V.42 reliable mode (V.42 enabled).
Modem-Initiated Flow Control
n = 3, 4, or 5
4
Flow control disabled.
CTS/RTS hardware flow control.
XON/XOFF software flow control.
XON/XOFF Pass-Through
n = 6 or 7
6
Respond to and discard XON/XOFF characters
when &E5 is selected.
Respond to and pass through XON/XOFF
characters when &E5 is selected.
33