Table of Contents
Advertisement
5.
When the BBS welcome screen appears, type your first name, last
name, and password following the prompts. If you are a first-time
caller, the BBS asks if your name is spelled correctly. If you answer
Y, a questionnaire appears. You must complete the questionnaire to
use the BBS on your first call.
6.
Press RETURN until the Main Menu appears (answer N to any
Newsletter or Bulletins questions for now). From the Main Menu you
have access to three main areas: the Files Menu, the Message Menu,
and Bulletins. For help with menu commands, type ?.
7.
From the Main Menu, type F and press RETURN to access the Files
Menu, then type D and press RETURN to download.
8.
At the prompt, type zdxhelp.hlp, then press RETURN twice.
9.
Answer Y or N to the automatic logoff question.
10. Type X and press RETURN to select the Xmodem transfer protocol.
11. To begin the download in Terminal, click Transfers, Receive Binary
File; select the destination directory, type the file name (zdxhelp.hlp),
and click OK to begin the transfer. If the download fails, your baud rate
may be set too high. Log off, set the COM port baud rate lower, and
call again.
12. To log off the BBS if you answered N in step 9, press RETURN, type
G for "good-bye," then press RETURN twice again.
Chapter 2 - Quick Start
19
Advertisement
Table of Contents
