FINAL DRIVE
FRONT GEARCASE DISASSEMBLY /
INSPECTION
1. Drain and properly dispose of gearcase fluid.
Remove any metal particles from the drain plug
magnet.
2. Remove the seven cover screws
w
cover plate
assembly.
7.16
3. Remove the LH output hub assembly
q
and remove the
4. Remove and inspect the armature plate
clutch housing or outer cover plate assembly.
NOTE
Nylon spacer is non-serviceable and should not be
removed.
AWD Diagnosis, page 7.14 for detailed inspection
process.
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
e
from the
r
. Refer to
© Copyright Polaris Industries Inc.