Transmission Installation - Polaris RANGER 500 2018 Service Manual

Hide thumbs Also See for RANGER 500 2018:

Table of Contents

TRANSMISSION

13. Place a spacer or support between the vehicle frame

and engine to hold the engine up in position.

14. Remove vent hose from transmission.

15. Remove the gear position switch connector (Item 8),

speed sensor connector (Item 9), crankshaft position

sensor connector, shift bracket bolts (Item 10) and

shift bracket (Item 11), shift cable clevis pin and

washer (Item 12) from the transmission.

16. Remove the wire ties retaining the main harness

harness to transmission and mounts.

17. Using a 15mm socket, remove the four bolts (Item

13) from the coupler securing the transmission to the

18. Remove the two bolts (Item 14) attaching the rear

transmission mount bracket assembly to the frame.

Remove the bolt (Item 15) that attaches the rear

mount to the transmission. Remove the mount

assemblies from the vehicle.

19. Using an overhead lift or an assistant, lift the

transmission up and out of the chassis.

TRANSMISSION INSTALLATION

1. With the help of an assistant, position the

transmission into the vehicle frame through the top.

9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual

Table of Contents