Line / Hose Routing; Fuel Line Routing; Vent Line Termination Fitting - Polaris RANGER 500 2018 Service Manual

Hide thumbs Also See for RANGER 500 2018:

Table of Contents

LINE / HOSE ROUTING

• The fuel supply line

is routed as shown below and retained by a clip

at the front engine mount.

• The fuel vent line

is routed as shown below and terminates at the fuel vent connector

that is inserted in the

This fitting should be inspected and tested using a Mity

If the vent line fitting is removed from the frame, it must

Vac™ to ensure proper venting. Connect the Mity Vac to

be replaced. The ears on the clip (arrows) will not hold

the fitting and give it 5 pumps. The gauge should return

properly once it is removed.

to 0 immediately or there is an obstruction.

9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual

Table of Contents