Polaris RANGER 500 2018 Service Manual page 222

ENGINE / COOLING SYSTEM
IAC Mounting Screw
Camshaft Sprocket Bolt
Oil Gallery Plug:
Oil Filter
Oil Pan Drain Plug
Oil Pickup
Oil Pressure Regulator
Oil Pressure Regulator Valve Cover
Oil Pump Sprocket Bolt
Oil Pump Cover Bolt
Spark Plug
Starter Mounting Bolts
Starter One-Way Clutch Screws
Stator Cover Screws
Stator Wire Routing Bolts
Thermostat Cover Bolts
T-MAP Retaining Bolt
TPS Mounting Screws
Valve Cover Bolts
Voltage Regulator Fasteners
Water Pump Cover Bolts
Water Pump Impeller
3.144
18 in-lbs (2 Nm)
14 ft-lb (19 Nm)
Replace camshaft sprocket bolt if loosened or
removed.
11 ft-lbs (15 Nm)
Lubricate seal with engine oil. Turn by hand until
filter gasket contacts sealing surface, then turn an
additional 3/4 turn
12 ft-lbs (16 Nm)
59.75 in-lbs (6.75 Nm )
20 ft-lbs (27 Nm)
8.8 ft-lbs (12 Nm)
9 ft-lbs (12 Nm)
8 ft-lbs (11 Nm)
9 ft-lbs (12 Nm)
Do Not Apply Anti-seize
3 ft-lbs (4 Nm)
9 ft-lbs (12 Nm)
Apply Loctite® 272™
9 ft-lb (12 Nm)
6 ft-lbs (9 Nm)
Apply Loctite® 242™
8 ft-lbs (11 Nm)
24 in-lbs (2.8 Nm)
18 in-lbs (2 Nm)
9 ft-lbs (12 Nm)
75 in-lb (6 Nm)
9 ft-lbs (12 Nm)
(Apply Loctite® 204™ to bolt threads)
Finger Tight *LH threads
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.