Transmission Installation - Polaris RZR XP 1000 2014 Service Manual

TRANSMISSION INSTALLATION

1. With the help of an
transmission into the vehicle frame through the left
rear wheel well area.
2. Slide transmission towards rear of the vehicle and
rotate the top of the transmission toward the right side
of the vehicle.
3. Install the rear transmission mount to the frame and
secure with M8 bolts and nuts. Torque nuts to
specification.
TORQUE
Rear Transmission Mount Bracket Fasteners
17 ft-lb (23 Nm)
4. Install M10 bolt and nut securing the transmission
bracket to the rear mount. Torque fasteners to
specification.
TORQUE
Rear Transmission Isolator Fasteners
40 ft-lb (54 Nm)
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
5. Install the two rear exhaust springs securing the
assistant, position the
6. Install the Clutch Center Distance Tool onto
q
:
w
:
muffler to the rear transmission mounting bracket.
transmission input shaft and install the drive clutch
e
bolt to properly position the clutch center distance.
The pictures below show the tool properly installed
r
.
Clutch Center Distance Tool:
PU-50658-A
2014–2015 Models
2016 Models
TRANSMISSION
6
6.9