Advertisement
HEADLIGHT REPLACEMENT
If a headlight fails to work properly, an expired lamp may need replacement.
Apply dielectric grease to the socket before installing the new lamp.
1. Hot components can cause burns to skin. Allow lamps to cool before
servicing.
2. Open the hood.
3. Unplug the headlamp from the wiring harness. Be sure to pull on the
connector, not on the wiring.
4. Turn the lamp counter-clockwise to remove it.
5. Install the new lamp.
Make sure the tab on the lamp locates properly in the housing.
6. Reinstall the harness assembly into the headlight assembly
FRONT/REAR TURN SIGNAL AND BRAKE LIGHT
REPLACEMENT
If an LED light fails to work properly, the entire assembly must be replaced. Your
authorized dealer can provide service.
TIP
MAINTENANCE
73
Advertisement
