Advertisement
MAIN POWER CONNECTOR
When the main power connector is
unplugged, the battery pack is
disconnected from all electrical
components, with the exception of the
contactor. After servicing the vehicle,
the main power connector should be the
last connection to be made.
DISCONNECTING POWER
1. Position the vehicle on a dry, firm, level surface.
2. Set the park brake.
3. Turn the key off.
4. Remove the hood. See page 55.
5. Locate the main power connector
below the horn assembly. Unplug the main power connector.
6. Locate and disconnect electrical accessory connectors (such as a heater or
a heated windshield).
7. If equipped, disconnect the negative cable from the auxiliary 12-volt battery.
8. Disconnect the main NEGATIVE cable from the traction batteries. Isolate the
cable end to ensure the circuit cannot be completed during service.
Damage to electrical connections and components will occur if they are
unplugged before the main power connector is disconnected.
Before servicing the vehicle's electrical system, always disconnect the main
power connector first, then disconnect any electrical accessory connections,
then disconnect the negative cable from the 12-volt battery (if equipped), then
disconnect the negative terminal from the main battery pack.
FEATURES AND CONTROLS
q
at the lower left front of the vehicle,
NOTICE
WARNING
37
Advertisement
