Advertisement
DRIVING PROCEDURE
1. Disconnect the charging cable.
2. Sit in the driver's seat and fasten the seat belt. Make sure passengers are
seated with seat belts secured.
3. Adjust mirrors as needed.
4. Turn the key clockwise to the ON position.
5. Apply the brakes.
6. Release the park brake.
7. Move the direction switch to the desired position.
8. Check your surroundings and determine your path of travel.
9. Keeping both hands on the steering wheel, release the brake pedal and
gradually push the accelerator toward the floor to begin driving.
10. Drive slowly. Practice maneuvering and using the accelerator and brakes on
level surfaces.
11. Before turning, activate a turn signal to alert others of your intentions.
12. Do not carry a passenger until you have at least two hours of driving
experience with this vehicle. Allow a passenger to ride only in a designated
passenger seat with seat belt secured.
13. To stop the vehicle, release the accelerator pedal completely and brake to a
complete stop.
Always bring the vehicle to a complete stop before changing the position of the
14. Set the park brake.
A rolling vehicle can cause serious injury or death. Always set the park brake
15. Turn the key off.
16. Recharge the batteries daily, or after each use fo the vehicle.
NOTICE
direction switch.
WARNING
when leaving the vehicle unattended.
OPERATION
59
Advertisement
