Table of Contents
Advertisement
5.
Release SW3.
6.
Release SW2 within 1s respect to SW3.
7.
Open the FW upgrade program.
8.
Click on Next button.
9.
In the window you will see the message "Found 1 device" (if the message is "No device connected"
repeat the points 3, 4, 5 and 6).
10. Select the FW image file by clicking on "Browse" button.
11. Click on "Upgrade Firmware" button and wait for the upgrade to be completed.
FIRMWARE UPGRADE - Tile R1250I - Technical Information Manual
26
Advertisement
Table of Contents
