Caen RFID Tile R1250I Technical Information Manual page 16

The Tile R1250I menu options are the following:
•
Active profile
•
Startup RF Power
•
HID Keyboard
•
HID format
•
HID inter-line delay
•
HID scan delay
•
HID filter time
To scroll through the main menu press the arrow keys, to change the listbox values press the "-" or "+" keys
and to exit and save press "ESC".
Active Profile
The Active Profile options are the following:
•
EASY2READ (factory default): choosing this option you select the CAEN RFID easy2read
communication protocol. Select this option in order to control the reader using the
Easy Controller Application
use with the EASY2READ profile please refer to § EASY2READ Profile chapter page 19.
•
HID: choosing this option you select the keyboard emulation protocol. For details on the use on
the HID profile please refer to § HID Profile chapter page 22.
The reader is sold with the factory profile set to EASY2READ.
To activate a different profile, press the right arrow to select the EASY2READ profile (factory profile), then
use the "-" or "+" keys until the desired profile is displayed (EASY2READ or HID). Press the ESC key to exit
from the configuration interface and to save the new setting.
The display shows the message "Configuration Saved" to inform you that the new settings is active.
Disconnect the USB cable and connect the reader once again.
CONFIGURATION MENU - Tile R1250I - Technical Information Manual
or the SDK (Software Development Kits)
CAEN RFID
library. For details on the
16