Filtering Test Results - Siemens Healthineers Atellica VTLi User Manual

‒ To review test results for a specific patient and view test details: Tap a patient result on
the Results Review screen. Then tap the test result itself for additional details such as
test date, Lot ID, and expiry date.
Default OK
‒ To navigate through the list of test results: Tap
‒ To resend test results to the hospital information system: On the Patient Test Results
screen, tap Resend. A confirmation message appears to confirm that the results are
being sent.
3. Tap to return to the Menu screen.
Filtering test results by date, test type, user, or cartridge type
INSTRUCTIONS
1. Tap > Results Review > Filter.
2. Do one of the following:
‒ Tap Date to open the Filter Date screen.
• Choose to view results for Any Date, Today only, Last 7 Days, or you Specify Date
Range.
• For a specific date range, use the arrows on the Date Selection screen to select the
date range. Tap OK to confirm your selection.
‒ Tap Test to choose whether you want to view all tests, patient tests, or QC tests.
‒ Tap User to select results from a specific user. Tap the user from the list, or select Any
User to see all user results.
‒ Tap Cartridge Type to select results for a specific cartridge type. Tap a cartridge type
from the list, or select Any Cartridge to see all cartridge results.
3. Do one of the following:
‒ Tap to return to the Results Review screen.
‒ Tap Default to reset the filter to the factory setting.
Chapter 2 - Testing Patient Samples
24
.