Viewing Results And Result Details; Removing A Cartridge - Siemens Healthineers Atellica VTLi User Manual

3. Close the cartridge lid as soon as the sample is added, and then close the analyzer cover.
When the analyzer detects the sample, it automatically begins the analysis.
1
The analyzer cover must be kept closed during analysis. If the cover is opened, the
analyzer cancels the current test.
4. The analyzer displays the test progress on the screen and when the test completes, the
test results automatically display.
5. If there is any reason to doubt the test results, tap Repeat to perform the test again with
a new cartridge.
Certain tests may require you to continue with additional tests for the same patient.
Tap Next (if available) to perform subsequent test for the current patient (see
Performing successive tests on page 23). Otherwise, tap Finish and Accept to conclude
and accept testing for the current patient.

Viewing results and result details

A result tile appears on the Patient Test Result screen.
INVALID displays if there is an error in determining the results.
8:57 AM 30-03-2020
Patient Test Result
Patient 123456789
HScTnl 8:57 AM
Result
cTnl
5.1
ng/l
Repeat Finish
• Tap the result tile for the indicated marker to view result details. Then tap Back to return
to the Patient Test Result screen.
• If there are multiple results on the screen, tap
Removing a cartridge (Remove cartridge screen)
INSTRUCTIONS
1. Open the analyzer cover.
2. Pull the cartridge out of the analyzer.
3. Dispose of the cartridge immediately as described in the instructions for use supplied
with the cartridge.
4. Close the analyzer cover.
Chapter 2 - Testing Patient Samples
2
1
to view the result tiles.
22