External Devices And Netcommand Setup (Overview); External Devices And Netcommand Setup (Overview) - Mitsubishi WS-48613 Owner's Manual

Connecting External Devices & NetCommand
NetCommand is able to control many current audio and video devices by sending remote control signals from the TV
to each device. NetCommand is also able to learn the remote control signals used by most audio video devices not
already in the TV's memory. NetCommand will also automatically switch the TV and compatible or learned Audio/Video
(A/V) Receivers to the correct input used with each device. It is important that the inputs on the TV and A/V Receiver
match the NetCommand Setup.
To simplify the installation of NetCommand, there is a step-by-step on-screen NetCommand Setup procedure. This
procedure details the type and brands of devices you are connecting to the TV. The NetCommand Setup also assigns
preset TV and A/V Receiver inputs for each device. You should connect each device to the TV input (both audio and
video) and to the A/V Receiver (audio) as shown in the figure below.
video and stereo
audio cables
TV
The following charts show which preset inputs you should use on the TV and A/V Receiver. Chart 1 shows TV inputs.
Chart 2 shows the A/V Receiver inputs used by A/V Receiver models already known by NetCommand.
Device Audio and Video Outputs to TV Inputs
Antenna/Cable (analog)
Antenna/Cable (digital)
Cable box
VCR
Satellite Receiver (DBS)
Camcorder
DVD Player
Chart 1.
Mitsubishi 1 Mitsubishi 2
Model Model
M-VR800 & M-VR900 &
M-VR1000 M-VR700
Device Audio Output to AV Receiver Inputs by Name
VCR VCR 1 VCR
Satellite Receiver Aux
Cable/DBS
DVD Player DVD DVD
TV Monitor Output TV
(& Digital Audio)
Chart 2.
After using NetCommand Setup, you may go to Edit NetCommand at any time to change the inputs you used for
connecting each device, custom name devices, add devices not included in the presets above or delete devices no
longer used. See Editing NetCommand Setup later in this chapter. See Connection Helpful Hints, inside back cover,
for additional information.
16
Device to be
connected
TV monitor output video, stereo
and digital audio cables
Device Audio and Video Ouputs to TV Inputs Ant-A
Device
Ant-DTV
Antenna/cable (analog)
Ant-B
Antenna/cable (digital)
Input-1
Cable Box
Input-2
VCR
Input-3
Satellite Receiver (DBS)
Component-1
Camcorder
DVD Player
Bose Denon Integra Kenwood Marantz Pioneer 1 Pioneer 2
Model Model Model
Lifestyle 28 AVR-2700 DTR-9.1
®
VCR VCR-1 Video 1
AUX CD Video 3
(built-in) DVDVDP DVD
TV TV TV/DBS Video 4
stereo and/or digital
audio cables
TV Input
Ant-A
Ant-DTV
Ant-B
Input-1
Input-2
Input-5
Component-1
Model Model Model Model
VR-2080 SR8200 VSX-D557 VSX-49TX
Video 1 VCR1 VCR/Tape VCR 1/DVR
Video 3 DSS CD SAT
Video 4 DVD LD/SAT DVD/LD
Video 4 TV DVD/TV TV
® Setup
AV
Receiver
Rotel Sony Yamaha 1 Yamaha 2
Model Model Model
RSX-1065 STR-DE825 RV-X2095 RX-V2200
Video 2 Video 1 VCR 1
Video 4 TV/DBS TV/DBS D-TV/LD
Video 5 TAPE/MD CD
Video 1 DVD/LD DVD/LD CBL/SAT
Model
VCR 1
DVD