Vga Input; Component Video; Appendix B: High Definition Input Connection Compatibility - Mitsubishi WS-48613 Owner's Manual

Appendix B: High Definition Input Connection Compatibility

Component-1 and Component-2 Inputs
These inputs are compatible with component video signals from standard DVD players and other equipment
sending a standard NTSC component video signal (480i). These inputs are also compatible with newer DVD players
sending 480p and are compatible with signals from digital TV receivers that send 1080i component video signals.

VGA Input

This input will accommodate most computers capable
of supporting a VGA monitor. The only compatible
display resolution is 640x480. The sync rate is 60 Hz.
SVGA and XVGA resolutions are not supported.
InputDTV
This input is compatible with most standard DTV and
satellite receivers with component video (YPbPr)
outputs. Compatible DTV signals are SDTV 480i/480p,
and HDTV 1080i. All other DTV signals, such as 720p,
need to be converted by the DTV receiver to one of the
compatible signal types. Please check the DTV receiver
specifications before connecting.
This input is compatible with some DTV receivers using
RGB with "separate H and V sync". Compatible DTV
signals are SDTV 480i, 480p, and HDTV 1080i. All
other DTV signals, such as 720p, need to be converted
by the DTV receiver to one of the compatible signal
types. Industry standards for DTV RGB signals
(systems, synchronization, timing, and signal strengths)
are not currently established. These inputs will not be
compatible with all DTV receivers that offer RGB, HV
outputs. RGB, HV signals with less than 5 cables are
not compatible.
If your DTV receiver offers both DTV component video
signals and DTV RGB, HV signals, we suggest you use
the DTV component video signals. Check the DTV
receiver specifications before connecting.
®
NetCommand IEEE 1394 & HAVi System Compatibility
This television is designed to conform to IEEE 1394 AV/C and HAVi Software standards in effect at the time of
development. This exciting new networking and control technology is designed to provide high-performance digital
connections and product control, making products easier to use.
At the time of development,the only products available for compatibility testing - the Mitsubishi and JVC DVHS VCRs.
These D-VHS VCRs are fully compatible with this TV.
As other manufacturers produce products that use IEEE 1394 AV/C and HAVi, they will be responsible for the
development of their products to meet the standards of the technology, as well as compatibility testing with other
products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these
other products. Any compatibility problems with other manufacturers products should be brought to the attention of
those manufacturers.
Full HAVi compatibility is limited to models WS-55813, WS-65713, WS-65813 and WS-73713. Basic function HAVi
compatibility is available with the other TV models.
Input Levels and Timing with

Component Video

EIA - 770.1 and EIA - 770.2 Standard Levels &
Timing
Y = 1.0Vp-p (includes sync) 75-Ohms
Pr = 700mVp-p, 75-Ohms (can also receive
signals from outputs labeled R-Y and Cr)
Pb = 700mVp-p, 75-Ohms (can also receive
signals from outputs labeled B-Y and Cb)
Input Levels and Timing When Used
With HD Component Video Signals
EIA - 770.3 Standard Levels and Timing
Y = 1.0Vp-p (includes sync) 75-Ohms
Pr = 700mVp-p, 75-Ohms
Pb = 700mVp-p, 75-Ohms
H = Not Used
V = Not Used
Input Levels and Timing When Used
With RGB, HV Video Signals
G = 700mVp-p (no sync), 1Vp-p (with sync)
75-Ohms
R = 700mVp-p, 75-Ohms
B = 700mVp-p, 75-Ohms
H = 4Vp-p+/-1.0v, 2.2k-Ohms
V = 4Vp-p+/-1.0v, 2.2k-Ohms
87