Electrical Adjustments; Equipment And Initial Setup - Mitsubishi WS-55517 Service Manual

MODELS: WS-55517 / WS-65517 / WS-73517
Note: Perform only the adjustments required.
Do not attempt an alignment if proper equipment is not available.
Test Equipment
• Oscilloscope (Unless otherwise specified, use 10:1 probes)
• Signal Generator (both SD and HD capable)
• Frequency Counter
• Direct Current Voltmeter
• Direct Current Power Supply
• Multiplex Audio Signal Generator
• Direct Current Ampere Meter
Test Signal
A. Monoscope Signal
Note: If you do not have
a monoscope signal source,
connect the unit to a VCR
and play a Monoscope
*alignment tape.
(* Part Number: 859C568060)
B. Color Bar Signal
Use the color bar signal shown
below, unless otherwise specified
in this manual.
100%
40%
40%
Split-Field Color Bars (100% window)

ELECTRICAL ADJUSTMENTS

75%
Monoscope Signal
1H
Page 17