Samsung OfficeServ 7100 Technical Manual page 35

OfficeServ 7100
TECHNICAL MANUAL
MMC: 815
DESCRIPTION:
Provides a means to copy the customer database to the media card (MCDB). This
enables the on board database DRAM (SYSDB) to be copied to the MMC+ media
card (MCDB) and also allows the MMC+ media database to be copied to the on
board DRAM. A daily save can be programmed to automatically save the on board
data base DRAM to the media card. This ensures that an up to date database is
always available in the case of a catastrophic failure. A daily save time of 00:00
means there is no save performed. It is recommended to CLEAR the media card
before the DRAM (SYSDB) is copied to it. When the DRAM is copied to the media
card there is no interruption in service. If the media card is copied to the DRAM
(SYSDB) the system will reset to accept the new data.
SYSTEM MEMORY MANAGEMENT for details.
DATABASE IDENTIFICATION
MCDB
SYSDB (DRAM)
S:mm/dd/yy hh:mm
DAILY SAVE hh:mm
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 815.
Display shows.
2. Press RIGHT soft key to move cursor.
3. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
CUSTOMER DATABASE COPY
OfficeServ 7100 MMC+ card database
OfficeServ 7100 MCP On-Board database
Indicates the time the database was saved to the media
card or the time the On-Board Database was last saved.
The time the On-Board Database (DRAM) will be saved to
the media card (MCDB)
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PART 2 APRIL 2007
IMPORTANT: See Section 1.3
DISPLAY
CUST DBASE:MCDB
S:03/12/99 00:00
CUST DBASE:MCDB
S:03/12/99 00:00
CUST DBASE:MCDB
CLEAR SMDB: NO
PROGRAMMING