Samsung OfficeServ 7100 Technical Manual page 329

OfficeServ 7100
TECHNICAL MANUAL
Programming:
Create a new Mailbox block with a number of 9998 and a Label Name of Query
Result.
On the Alerts screen change Message alert is currently on to Yes.
In Alert phone number enter the technician's cell phone number and then click
Save.
Create a new Bye block with a Label Name of After Hours.
Change the Disconnect Prompt field to 6000 then click Save.
Create a new Query block with a Label Name of SW Version.
Enter 6004 in the Query prompt field.
Change Last query to Yes.
Enter 6008 in the Header prompt field,
Click the Mailbox field and choose the Query Result Mailbox, then click Save.
On the Call Director screen change the Type field for the NEXT Event Pointer to
BYE.
Click the Target Name field and choose the After Hours block, then click Save.
Create a new Query block with a Label Name of System Type.
Change the Query prompt field to 6003.
Change the Header prompt field to 6007 and click Save.
On the Call Director screen change the Type field for the NEXT Event Pointer to
QRY.
Click the Target Name field and choose the SW Version block, then click Save.
Create a new Query block with a Label Name of Callback Number.
Change the Query prompt field to 6002.
Change the Header prompt field to 6006 and click Save.
On the Call Information screen change Take input from to ENTRY then click
Save.
On the Call Director screen change the Type field for the NEXT Event Pointer to
QRY.
Click the Target Name field and choose the System Type block, then click Save.
Create a new Query block with a Label Name of Caller Name.
8.1.33
PROGRAMMING
PART 8 APRIL 2007