System Option - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
MMC: 861
DESCRIPTION:
Assigns several options (listed below) on a system wide basis.
OPTIONS
0 AUTO UPDATE TIME
1 SYSTEM SPEED BIN
2 IDLE WHEN ENBLOCK
3 2 LINE ENBLOCK
LP TRK TONE DISC
SPNET OVERLAP

SYSTEM OPTION

When this option is set to ENABLE The system
will synchronize the system time and date
setting to the data received on an ISDN call
connect message. If a system has multiple PRI
cards the PRIORITY 1 setting in MMC 826 will
determine the card used.
When this option is set to 500. The system will
have a maximum of 500 system speed dial
bins numbered 500 to 999. When set to 950
the system will have a maximum of 950 system
speed dial bins numbered 050 to 999. Station
speed dial bins will be 000 to 049.
Note: Personal speed dial number changes
from 2 digits to 3 digits when 950 is selected.
When this option is enabled the ITP-5121D
keyset will receive incoming calls when dialing
out before the SEND button is pressed. When
disabled an incoming call will appear as a call
waiting call if idle CALL key is available.
Note: This option has no effect if #3 below is
disabled.
When this option is enabled the ITP-5121D
keyset can dial a telephone then press the
SEND button to place the call. This operates
like a cell phone. When disabled the ITP-
5121D sends each digit as you dial it.
NOT USED IN USA
NOT USED IN USA
PROGRAMMING
PART 2 APRIL 2007