Grandstream Networks GRP261 Series Administration Manual page 48

Internet Protocol
IPv4 Address
IPv4 Address
Host name (Option 12)
Vendor Class ID (Option 60)
PPPoE Account ID
PPPoE Password
PPPoE Service Name
Ipv4 Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
Preferred DNS Server
IPv6 Address
IPv6 Address Type
Static IPv6 Address
IPv6 Prefix Length
IPv6 Prefix(64 bits)
DNS Server 1
DNS Server 2
Preferred DNS server
Network Settings �� Ethernet Settings
Selects "IPv4 Only", "IPv6 Only", "Both, prefer IPv4" or "Both, prefer IPv6". The
default setting is "IPv4 only".
Allows users to configure the appropriate network settings on the phone to obtain
IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set
to "DHCP".
Specifies the name of the client. This field is optional but may be required by
Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the PPPoE Service Name.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used for IPv4.
Enter the Default Gateway when static IP is used for IPv4.
Enter the DNS Server 1 when static IP is used for IPv4.
Enter the DNS Server 2 when static IP is used for IPv4.
Enters the Preferred DNS Server for IPv4.
Allows users to configure the appropriate network settings on the phone to obtain
IPv6 address. Users could select "Auto-configured" or "Statically configured" for the
IPv6 address type.
Enter the static IPv6 address when Full Static is used in "Statically configured" IPv6
address type.
Enter the IPv6 prefix length when Full Static is used in "Statically configured" IPv6
address type.
Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically configured"
IPv6 address type.
Enter the DNS Server 1 for IPv6.
Enter the DNS Server 2 for IPv6.
Enter the Preferred DNS Server for IPv6.