Grandstream Networks GRP261 Series Administration Manual page 51

OpenVPN® Mode
Upload OpenVPN® config zip file
OpenVPN® Server Address
OpenVPN® Port
OpenVPN® Transport
OpenVPN® CA
OpenVPN® Certificate
OpenVPN® Client Key
OpenVPN® Cipher Method
OpenVPN® Username
OpenVPN® Password
Additional Options
Enable SNMP
Version
Selects OpenVPN® mode to use:
● Simple mode: Using simple mode, the administrator needs to configure the
OpenVPN settings below.
● Expert mode: After switching to "expert mode", the administartor can manually
upload a single OpenVPN client(.ovpn) file
Upload OpenVPN® .zip file containing .ovpn file when OpenVPN® Mode is set to
"Expert Mode"
Note: This field appears only when "OpenVPN® Mode" is set to "Expert Mode".
Specify the IP address or FQDN for the OpenVPN® Server.
Specify the listening port of the OpenVPN® server. The valid range is 1 – 65535.
The default value is "1194".
Specify the Transport Type of OpenVPN® whether UDP or TCP.
The default value is "UDP"
Click on "Upload" to upload the Certification Authority of OpenVPN®. For a new
upload, users could click on "Delete" to erase the last certificate, and then upload a
new one.
Click on "Upload" to upload OpenVPN® certificate. For a new upload, users could
click on "Delete" to erase the last certificate, and then upload a new one.
Click on "Upload" to upload OpenVPN® Key.
For a new upload, users could click on "Delete" to erase the last certificate, and then
upload a new one.
Specifies the Cipher method used by the OpenVPN® server. The available options
are:
● Blowfish
● AES-128
● AES-256
● Triple-DES
The default setting is "Blowfish".
Configures the optional username for authentication if the OpenVPN server
supports it.
Configures the optional password for authentication if the OpenVPN server supports
it.
Additional options to be appended to the OpenVPN® config file, separated by
semicolons. For example, comp-lzo no;auth SHA25
Note: Please use this option with caution. Make sure that the options are
recognizable by OpenVPN® and do not unnecessarily override the other
configurations above.
Network �� SNMP Settings
Enables/Disables the SNMP feature. Default settings is "No".
SNMP version. Select Version 1, Version 2 or Version 3.
Default is "Version 3".