Grandstream Networks GRP261 Series Administration Manual page 43

Onhook Dial Barging
Off-hook Auto Dial
Off-hook Auto Dial Delay
Off-hook Timeout (s)
Enable Live Keypad
Live Keypad Expire Time
Enable Auto Redial
Auto Redial Times
Auto Redial Interval
Bypass Dial Plan Through Call
History and Directories
Enable Call Completion Service
Incoming
Enable Incoming Call Popup
Enable Missed Call Notification
"Modify" to edit available options.
Allows incoming call to interrupt on-hook dialing when set to "Enabled". Default
setting is "Enabled".
Configures a User ID/extension to dial automatically when the phone is off hook.
The phone will use the first account to dial out. Default setting is "No".
Configures the number of seconds during which the phone will wait before dialing
out when off-hood auto dial number is configured.
The default is 4.
If configured, when the phone is off hook, it will go on hook after the timeout (in
seconds). The default value is 30 seconds. Valid range is from 10 to 60.
Enables to Dial out automatically the number punched in after the number of
seconds that the user had set when the phone is off-hook.
Default value is "No"
Sets the Live Keypad expiration time before initiating the call using the Live Keypad
feature. Interval is between 2s and 15s. The default value is 5s.
Enables the phone to redial automatically when called number is busy.
If enabled, the phone will prompt the user to start "automatic redial" or no. If yes, the
phone will redial called number several times [Automatic Redial Times] with
[Automatic Redial Interval] between each call. The user is guided via different
prompts on phone's LCD displaying number of remaining attempts, count-down to
initiate next auto redial and allowing user to manually initiate the call without waiting
for the specified interval [Automatic Redial Interval]. The phone will stop automatic
redial after successful attempt (called party not busy) or after unsuccessful
attempts [Automatic Redial Times].
The default setting is "No".
The number of times to attempt to call using Automatic Redial feature. The valid
range is 1 – 200.
The default value is "10".
The interval between each call attempt using Automatic Redial feature. The valid
range is 1 – 360.
The default value is "10".
Enable/Disable the dial plan check while dialing through the call history and any
phonebook directories.
The default setting is "No".
When the automatic redial and call completion service are enabled, and the user
makes a call to callee, when the callee is busy at the moment, phone will monitor
callee's status. Once the callee is available, phone will ask if user wants to redial
again.
The default setting is "No".
If set to "Yes", phone will pop up an incoming call window to notify the call.
If set to "No", there will be no notification pop up on LCD when there is an incoming
call. This way users will not get disrupted by unexpected popup call but still get
notified by the flashing line LED.
The default setting is "Yes".
Allows users to show/hide the notification popup for missed calls.