Grandstream Networks GRP261 Series Administration Manual page 39

Call Pickup Barge-In Code
Call Park Feature Code
Call Park Retrieve Feature Code
PUBLISH for Presence
SCA
Line-Seize Timeout
Dial Plan
Name
Rule
Type
Account x �� Feature Codes
Enable Local Call Features
DND
DND Call Feature On
DND Call Feature Off
Call Forward Always
On
Off
Target
Call Forward Busy
up a call with BLF key. The default setting is **.
Set feature access code of Call Pickup with Barge-In feature.
Configures the feature access code for parking current call to parking lot or
another extension.
Configures the feature access code for parking current call to parking lot or
another extension
Enables presence feature on the phone. The default setting is "Disabled".
For Shared Call Appearance, phone must send a SUBSCRIBE-request for the
line-seize event package whenever a user attempt to take the shared line off
hook. "Line Seize Timeout" is the line-seize event expiration timer. The default
value is 15 seconds. The valid range is from 15 to 60.
Enter the name for the configured rules.
Enter the rule settings (number pattern, prefix to add ...etc).
Choose the type of the rule (pattern, block, dial now, prefix & second tone).
When enabled, Do Not Disturb, Call Forwarding and other call features can be
used via the local feature codes on the phone. Otherwise, the provisioned
feature codes from the server will be used. User configured feature codes will
be used only if server provisioned feature codes are not provided. And once
feature codes are configured, either via server provisioning or local setting, a
Softkey named "Features" will show on the LCD screen.
Note: If the device is registered with Broadsoft account, it doesn't matter if
local call features are enabled or disabled, once the Broadsoft account is set,
special feature to Broadsoft and Feature Key Synchronization is enabled, the
call feature will be handled by Broadsoft server, not by the phone.
Configures DND feature code to turn on DND.
Configures DND feature code to turn off DND.
Configures Call Forward Always feature code to activate unconditional call
forwarding.
Configures Call Forward Always feature code to deactivate unconditional call
forwarding.
Configures the extension for the call to be forwarded to.