Grandstream Networks GRP261 Series Administration Manual page 58

User
The default setting is "Enabled".
Web
Access
Validat
e
After enabling this feature, phone will validate the server's certificate. If the server that our phone tries to register
Server
on is not on our list, it will not allow server to access the phone.
Certific
ates
Web/Re
strict
Specifies the time in minutes that the web or LCD login interface will be locked out to user after five login failures.
mode
This lockout time is used for web login, and LCD restrict mode admin login. Range is 0-60 minutes.
Lockout
The default setting is "5".
Duratio
n
Web
Configure attempt limit before lockout.
access
Attempt Default is 5. Range is 1-10.
Limit
User Info Management
Test
Passwo
rd Checks password strength to ensure better security.
Strengt
h
User Password
New
Passwo Set new password for web GUI access as User. This field is case sensitive.
rd
Confirm
Passwo Enter the new User password again to confirm.
rd
Admin Password
Current
Passwo The current admin password is required for setting a new admin password.
rd
New
Passwo Set new password for web GUI access as Admin. This field is case sensitive.
rd
Confirm
Passwo Enter the new Admin password again to confirm.
rd
Client Certificate
Maximu Configures the minimum TLS version supported by the phone. The minimum TLS version must be less than or
m TLS equal to the maximum TLS version. It can be set to TLS 1.1, TLS 1.0, or TLS 1.2. Set by default to TLS 1.1
Version